Сигнализация: конфигурация и скрипты

[roman5]

Сообщение от vicente

Я не вижу в скриптах входных и выходных (один скрипт иногда) того места, где передача STOP_AND_PROCEED прерывается, а она должна прерываться на станциях - скрещения, старты-стопы сервисов и т.п.

Вот скрипт distance выходного. Выходной не хватает sap.

Скрытый текст:

SCRIPT APK_3AB_YGR_DISTANCE // прогон для выходных

	extern float	block_state ();
	extern float	def_draw_state ();
	extern float	state;
	extern float	draw_state;
	extern float	next_sig_lr ();
	extern float	next_sig_mr ();
	extern float	opp_sig_lr ();
	extern float	opp_sig_mr ();
	extern float	sig_feature ();
	float WORK1; float ONE_WAY; float SVET; float POEZD; float next_INFO; float opp_ONE_WAY; float opp_POEZD;

	ONE_WAY = 0; SVET = 0; POEZD = 0; next_INFO = 8; opp_POEZD = 0; opp_ONE_WAY = 0;
	if ( block_state() !=# BLOCK_JN_OBSTRUCTED ) {
		WORK1 = next_sig_mr ( SIGFN_NORMAL ); if ( WORK1 ==# SIGASP_STOP_AND_PROCEED ) { ONE_WAY = 1; }
		WORK1 = next_sig_lr ( SIGFN_DISTANCE );
		if ( WORK1 ==# SIGASP_CLEAR_2 ) { SVET = 5; } if ( WORK1 ==# SIGASP_CLEAR_1 ) { SVET = 4; }
		if ( WORK1 ==# SIGASP_APPROACH_3 ) { SVET = 3; } if ( WORK1 ==# SIGASP_APPROACH_2 ) { SVET = 2; }
		if ( WORK1 ==# SIGASP_APPROACH_1 ) { SVET = 1; }
		if ( WORK1 ==# SIGASP_RESTRICTING ) { POEZD = 2; } if ( WORK1 ==# SIGASP_STOP_AND_PROCEED ) { POEZD = 1; }
		WORK1 = next_sig_mr ( SIGFN_INFO );
		if ( WORK1 ==# SIGASP_CLEAR_1 ) { next_INFO = 7; } if ( WORK1 ==# SIGASP_APPROACH_3 ) { next_INFO = 6; }
		if ( WORK1 ==# SIGASP_APPROACH_2 ) { next_INFO = 5; } if ( WORK1 ==# SIGASP_APPROACH_1 ) { next_INFO = 4; }
		if ( WORK1 ==# SIGASP_STOP_AND_PROCEED ) { next_INFO = 2; } if ( WORK1 ==# SIGASP_RESTRICTING )
		{ next_INFO = 3; } if ( WORK1 ==# SIGASP_STOP ) { next_INFO = 0; }
	}
	if ( sig_feature( SIGFEAT_GRADIENT_PLATE ) && !sig_feature( SIGFEAT_NUMBER_PLATE ) ) { // для входного - мимо
		WORK1 = opp_sig_mr ( SIGFN_NORMAL );
		if ( WORK1 ==# SIGASP_STOP_AND_PROCEED ) { opp_ONE_WAY = 1; }
		WORK1 = opp_sig_lr ( SIGFN_DISTANCE );
		if ( WORK1 ==# SIGASP_RESTRICTING ) { opp_POEZD = 2; } if ( WORK1 ==# SIGASP_STOP_AND_PROCEED ) { opp_POEZD = 1; }
	}

	if ( next_INFO ==# 0 ) { next_INFO = 8; }
	if ( next_INFO ==# 4 ) { next_INFO = 8; }
	if ( next_INFO ==# 5 ) { next_INFO = 8; }
	if ( next_INFO ==# 6 ) { next_INFO = 8; }
	if ( next_INFO ==# 3 && sig_feature( SIGFEAT_NUMBER_PLATE ) )
	{ next_INFO = 8; }

	state = SIGASP_STOP;
	if ( next_INFO ==# 8 && POEZD ==# 0 && block_state() ==# BLOCK_CLEAR ) {
		if ( SVET ==# 0 ) { state = SIGASP_CLEAR_1; }
		if ( SVET ==# 1 ) { state = SIGASP_APPROACH_3; }
		if ( SVET ==# 2 ) { state = SIGASP_CLEAR_2; }
		if ( SVET ==# 3 ) { state = SIGASP_CLEAR_2; }
		if ( SVET ==# 4 ) { state = SIGASP_CLEAR_2; }
		if ( SVET ==# 5 ) { state = SIGASP_CLEAR_2; }
	}

	if ( sig_feature( SIGFEAT_GRADIENT_PLATE ) && !sig_feature( SIGFEAT_NUMBER_PLATE ) ) { // для входного - мимо
		if ( ( block_state() ==# BLOCK_OCCUPIED || POEZD !=# 0 ) && opp_POEZD !=# 1 ) { state = SIGASP_STOP_AND_PROCEED; }
		if ( opp_ONE_WAY ==# 1 || opp_POEZD ==# 2 ) { state = SIGASP_STOP_AND_PROCEED; }
	}
	if ( sig_feature( SIGFEAT_NUMBER_PLATE ) && POEZD ==# 1 ) { // для проходных SIGFEAT_NUMBER_PLATE - мимо
		state = SIGASP_STOP_AND_PROCEED;
	}
	draw_state = def_draw_state (state);

Между входным и выходными обычно стоят служебные сигналы скрытые, у них так обычно: копируют состояние distance у последнего проходного.

Скрытый текст:

SCRIPT APK_Copy_DISTANCE

	extern float	block_state ();
	extern float	def_draw_state ();
	extern float	state;
	extern float	draw_state;
	extern float	next_sig_lr ();
	float WORK1; float POEZD;

	POEZD = 0;
	if ( block_state() !=# BLOCK_JN_OBSTRUCTED ) {
		WORK1 = next_sig_lr ( SIGFN_DISTANCE );
		if ( WORK1 ==# SIGASP_RESTRICTING ) { POEZD = 2; } if ( WORK1 ==# SIGASP_STOP_AND_PROCEED ) { POEZD = 1; }
	}

	state = SIGASP_STOP;
	if ( block_state() !=# BLOCK_JN_OBSTRUCTED ) { state = next_sig_lr ( SIGFN_DISTANCE ); }
	if ( block_state() ==# BLOCK_OCCUPIED && POEZD !=# 1 ) { state = SIGASP_RESTRICTING; }
	draw_state = def_draw_state (state);