Тема: Radeon HD 2400 PRO
Показать сообщение отдельно
Старый 30.08.2009, 18:43   #81
сандро
Матёрый пользователь
 
Аватар для сандро
 
Регистрация: 20.08.2007
Сообщений: 6,384
Вы сказали Спасибо: 35
Поблагодарили 1,180 раз(а) в 616 сообщениях
сандро стоит на развилке (репутация по умолчанию)
По умолчанию

Переустановил я винду, FPS подрос с новой картой, но не сильно (видать сама карта такая тупая), а вот тормоза выличелись устновкой мозгов 1024 метра против 128. Но, счтастье не долго длилось, комп новые мозги не воспринимает. Синий экран из-за них, как я понял.

A problem has been detected and windows has been shut down to prevent damage to your computer. A driver has overrun a stack-based buffer. This overrun could potentially allow a mallcious user to again control of this machine. If this is the first time you,ve seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware of software is properly installed. If this is a new installation, ask yuor hardware or sosftware manufatcturer for any windows updates you might need. If problems continue, disable or remove any
instsalled hardware or software. Disable BIOS memory options such as caching or shodowing. If you need to use safe mode to remove or disable components, restart yor computer, press F8 to select Advanced Startup Options, and then select Safe Mode.


The technical information:

*** STOP: 0X00000F7 (0X0000001F, 0[0000 BB40, 0XFFFF44BF,0X00000000)


Или

The problem seens to be caused by the following file: win 32k.sys

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you,ve seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:

Check to make sure any new hardware of software is properly installed. If this is a new installation, ask yuor hardware or sosftware manufatcturer for any windows updates you might need. If problems continue, disable or remove any
instsalled hardware or software. Disable BIOS memory options such as caching or shodowing. If you need to use safe mode to remove or disable components, restart yor computer, press F8 to select Advanced Startup Options, and then select Safe Mode.


The technical information:

*** STOP: 0X00000050 (0XFFFFFC9, 0X00000000,0XBF96190C,0X00000000)

*** win 32k.sys - Adress BF96190C base atBF800000, patestamp 48025f2a
сандро вне форума   Ответить с цитированием
Старый 01.01.2007, 12:00  
Яndex
Спонсор
 
 
Регистрация: 01.01.2007
Сообщения: 500


Реклама показывается изредка по случайному принципу
По умолчанию РЕКЛАМА