TEP10-248 Sound help please

[Penguin]

Hi,

I downloaded the TEP10-248, cab and sounds.
I'm running Open Rails and the sounds are causing a crash. I'm not sure if there is something I should've have done with the .sms files? I just installed with the installer and didn't change any files. Below is taken from the readme, do I need to do anything here? If not, is there any reason why the sounds may be causing a crash? If I remove the sound folder completely there are no crashes.

Edit: I just tried MSTS and everything seems to work ok. The sounds are just not working in Open Rails and cause it to crash.

Sounds for diesel locomotives TE10, TEP10 and 2TE10(L, V, M, M-K, S, U, Ut, Utk)
Version 1.0
************************************************** ***************************
IT'S NECESSERY USING LOCOMOTIVES oF SERIES TE10, TEP10 and 2TE10(L, V, M, M-K, S, U, Ut, Utk)!

tsrloco_2te10l-eng.sms - 2TE10L with 10D100.
tsrloco_2te10v-eng.sms - 2TE10V with 10D100.
tsrloco_2te10m-eng.sms - 2TE10M with 10D100.
tsrloco_2te10u-eng.sms - 2TE10U and 2TE10Ut with 10D100M.
tsrloco_2te10utk-eng.sms - 2TE10Utk with 1A-5D49-3, ver. 1 (wide smokestack)
tsrloco_2te10mk-eng.sms - 2TE10M-K with 1A-5D49-3, ver. 1 (narrow smokestack).
tsrloco_te10-eng.sms - TE10/TEP10/TE12 with 10D100

[Killer]

http://www.trainsim.ru/download/show/id/1749/

[vicente]

Move down the "sound detail level" in "options --> Audio".

[Penguin]

Move down the "sound detail level" in "options --> Audio".

Thanks, this does fix the problem but you lose almost all the sounds if you move the audio detail from 5 to just 4. The crash seems to happen when you stop the train. I did also try unchecking MSTS Bin compatible sound but that still causes a crash.

Does this happen to other people? I don't understand the other parts of the forum.

I'll try and start removing individual sound files and see if it might be just one that causes the crash.

Добавлено через 1 час 54 минуты
Ok, found if you remove tsrLoco_te10-eng.sms stops the crashing but then you also lose the exterior sounds. Removing any other file in the sound folder makes no difference, you still get crashes.

[vicente]

You can replace the original SMS file, as I did for myself for almost all TE10 locomotives from this site. There are two ways to do it
1. Enter the path to another SMS file, that not causing a crash in the *.eng . Sounds for M62 locomotive may be the solution. Anyway, it solved the problem for me. Found a path of sound in the *.eng (It is after the block of lights) and change line
Sound ( "../../tsrLoco_TE10-Alias/Sound/tsrLoco_te10-eng.sms" )

to
Sound ( "../../tsrLoco_2M62U-Alias/Sound_3/tsrloco_m62u2-eng.sms" )

All this, of course, if you downloaded the M62...
Otherwise, you need to find another sounds.
2. Also you can to copy some sms strightly to the loco's folder and rename him tsrLoco_te10-eng.sms
Good luck!

[Penguin]

You can replace the original SMS file, as I did for myself for almost all TE10 locomotives from this site. There are two ways to do it
1. Enter the path to another SMS file, that not causing a crash in the *.eng . Sounds for M62 locomotive may be the solution. Anyway, it solved the problem for me. Found a path of sound in the *.eng (It is after the block of lights) and change line

to

All this, of course, if you downloaded the M62...
Otherwise, you need to find another sounds.
2. Also you can to copy some sms strightly to the loco's folder and rename him tsrLoco_te10-eng.sms
Good luck!

vicente,
Thank you! Yes, worked perfectly! I used option 1.
I'm really enjoying Russian trains!

Добавлено через 1 час 6 минут
Sorry, I do have one last question if anyone is using the TEP10-248 in Open Rails.
Once the train is moving at a reasonable speed, the cabin door opens and shuts. I haven't found how I can keep the door either open or closed. In MSTS it just stays shut.

[vicente]

Sorry, I do have one last question if anyone is using the TEP10-248 in Open Rails.
Once the train is moving at a reasonable speed, the cabin door opens and shuts. I haven't found how I can keep the door either open or closed. In MSTS it just stays shut.

So far, there is no solution to this problem. Refolding was announced by developers

Regards

[Penguin]

So far, there is no solution to this problem. Refolding was announced by developers

Regards

Ok, thanks again!

[vicente]

Please, download a fixed model from this post (http://trainsim.ru/forum/showpost.php?p=525168&postcount=2555). Don't forget to replace a sound line in the *.eng
Regards

[Penguin]

Please, download a fixed model from this post (http://trainsim.ru/forum/showpost.php?p=525168&postcount=2555). Don't forget to replace a sound line in the *.eng
Regards

vicente, thanks I just read your post but the link wasn't working. I did find a file named "SHAPES_TEP10_19052016.rar"
Is this the correct one? I replaced the files in my "tsrLoco_TEP10-248" folder with the ones in the .rar but the problem is still there. Not sure what I should have done in the .eng file if I did replace with the correct files?